GE 68K System - Manual (Page 84)

GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2 General
3-58 Full Release
RR - Report RAM Partitions
Platform o CPM o D20
D20 Base o D20 ME
D20 Base þ D20/200
CCU Base þ D20/200 ME
CCU Base þ D25
Description Use this command to display information on the RAM divisions currently configured
in the system.
• On a D25 platform, this command reports the base addresses of the RAM and
NVRAM regions, and the size of the NVRAM region.
• On a D200 platform, this command reports the base addresses of the global
RAM and global NVRAM regions, and the size of the global NVRAM region.
In either case, the monitor reports total amount of free RAM.
Syntax Below is usage and syntax information for this command
Command Format rr
Variables None
Parameters None
Example Type rr and press ENTER .
Results: The monitor displays the information about existing
RAM configuration.
Special
Considerations None