GE 45608 - Manual (Page 24)

24
Z-Wave Key Chart
A. SET – Press & hold to enter setup mode. When in setup mode,
press & release to back up one level in the setup menu or press
& hold to cancel setup.
B. SHIFT – For use in Z-Wave setup & operation modes. Press
& release to shift number key from devices 1 – 9 to 10 – 18.
C. ARROWS – scroll left or right to highlight desired menu item.
D. OK – Press & release to select highlighted menu item
E. BRT & DIM (Volume Up & Down) – Light mode only - Use AR-
ROW KEYS or number keys to select desired light (displayed in LCD)
and then press & hold to adjust brightness of Z-Wave lights (Must
be dimmable)
F. CANCEL (Exit) – Press & release to back up one menu level in Z-
Wave programming mode or exit the Z-Wave “waiting” mode
MODE KEYS:
G. LIGHT – Use to program and/or control individual lights
H. GROUP – Use to program and/or turn multiple lights On or Off
at the same time
I. SCENE – Use to program and/or control multiple lights with
preset brightness levels.
J. ALL – Use to turn On/Off all Z-Wave lighting at the same time.
Press & release “All” key, and then the On or Off key (Channel Up
or Down)
K. Z-WAVE KEY – This key cycles the remote between Z-Wave and
A/V modes. In Z-Wave mode, the green LED beneath the button
blinks to indicate the following:
1. Twice to indicate entering programming mode or a
programming success.
2. Once (long blink) to indicate an invalid action during
programming or a programming failure.
L. NUMBER KEYS – Use to select individual lights, groups or
scenes. Press & release SHIFT to change number keys from
devices 1 – 9 to 10 – 18.
M. ON & OFF (Channel Up & Down) – Select the desired mode and
use ARROW KEYS or number keys to select desired light, group or
scene (displayed in LCD) and then press & release to turn On or Off.
Also used for All-On and All-Off functions in All mode
N. Thermostat symbol (Info Key) – Press & release to select
Z-Wave thermostat