Grizzly H6144 - Manual (Page 6)

H6144 34° Angle Finish Nailer–2½" -5 -
INTRODUCTION
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
H6144 34º Angle Finish Nailer–2½". This
model is part of a growing Grizzly family of
fine pneumatic tools. When used accord-
ing to the guidelines set forth in this man-
ual, you can expect years of trouble-free,
enjoyable operation and proof of Grizzly’s
commitment to customer satisfaction.
The Model H6144 is designed to toenail
into corners and shoot at any angle. This
nailer is ideal for door, window, exterior,
and decorative trim, cabinet work, and fin-
ish paneling. The Model H6144 features
a 360° exhaust port, comfort grip rubber
handle, economical air consumption with
low noise, narrow nose for tight spots, and
quick jam release mechanism.
The specifications, details, and photo-
graphs in this manual represent the Model
H6144 as supplied when the manual was
prepared. However, owing to Grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of Grizzly.
Foreword Contact Info
Machine Data
Nail Size .....................15 gauge finish nails
Nail Length ....................................1¼"-2½"
Magazine Capacity ........................ 40 Nails
Air Inlet ...........................................¼" NPT
Dimension ...............2.92" x 10.43" x 16.14"
Weight .............................................5¼ lbs.
Operating Pressure .................. 60-100 PSI
Read the manual before operation.
Become familiar with this nailer, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety or
operational information is not under-
stood or followed.