Grizzly H6144 - Manual (Page 7)

H6144 34° Angle Finish Nailer–2½" -6 -
SET UP
Figure 1. Model H6144 inventory.
B
C
D
G
Unpacking
Your Model H6144 left our warehouse in
a carefully packed box. If you discover
the nailer is damaged after you have
signed for delivery, please immediately
call Customer Service at (570) 546-9663
for advice.
Save the containers and all packing mate-
rials for possible inspection by the car-
rier or its agent. Otherwise, filing a freight
claim can be difficult.
When you are completely satisfied with
the condition of the shipment, you should
inventory the equipment.
Inventory
After you remove the nailer case from the
box you should find the following.
Model H6144 Inventory (Figure 1)
A. 34° Finish Nailer−2½ ......................... 1
B. Safety Goggles ................................. 1
C. Oil ....................................................... 1
D. Hex Wrench 3MM .............................. 1
E. Hex Wrench 4MM .............................. 1
F. Hex Wrench 5MM .............................. 1
G. Case ................................................... 1
F E
A