Clearing jammed staples – Grizzly 18 gauge deep stapler Kit H7678 User Manual

Page 12

Advertising
background image

h7678 18 gauge deep stapler Kit

-10

-

a jammed staple must be cleared before
using the stapler again.

to clear a jammed staple from the dis-
charge area:

1. disconnect stapler from the

air supply!


2. Unlock the catch lever and slide the

magazine pusher all the way back.

3. remove the staple stick from the mag-

azine.

4. Flip the quick release latch as shown in

figure 6 and open the cover.

clearing Jammed

staples

5. the jammed staple should now be vis-

ible; remove it from the discharge area
with needle nose pliers.

6. secure the quick release latch.

7. inspect the staple stick. if it is bent

or damaged, throw it away and insert
a new stick that only contains clean,
undamaged staples. do not use dirty
or damaged staples!

8. slide the magazine forward until the

catch lever engages.

figure 6. area to remove jammed staple.

Quick

release

Latch

Cover

discharge

area

Advertising