Genie SUPERLIFT 33547 - Manual (Page 10)

8 Genie Superlift Contractor Part No. 33547
Operator's Manual First Edition • Ninth Printing
PRE-OPERATION INSPECTION
Pre-operation Inspection
R Be sure that the operator’s manual is complete,
legible and in the storage container located on
the machine.
R Be sure that all decals are legible and in place.
See Decals section.
Check the following components or areas for
damage, improperly installed or missing parts and
unauthorized modifications:
R Winch and related components
R Base components
R Legs
R Stabilizers and latch plates (if equipped)
R Mast columns
R Carriage hold-down bar
R Cable anchor
R Cable and pulleys
R Wheels and casters
R Load handling attachments
R Nuts, bolts and other fasteners
R Cable (kinks, frays, abrasions)
Check the entire machine for:
R Dents or damage
R Corrosion or oxidation
R Cracks in welds or structural components
R Be sure that all structural and other critical
components are present and all associated
fasteners and pins are in place and properly
tightened.
R Be sure there is a minimum of 4 wraps of cable
around the winch drum when the carriage is fully
lowered.