GE DV-354 - Manual (Page 40)

The Audio Settings Menu
1 Press SETUP and select ‘Audio
tings’ from the on-screen display.
Note
2 Highlight Virtual Surround, then use
the buttons (cursor left/right) to
change to or ‘Off’, as
required.
Virtual Surround doesn’t work with DTS
or 96kHz linear PCM audio, or during
MP3 playback, through either the
analog or digital outputs.
If the player is outputting Dolby Digital
or MPEG bitstream audio (in other
words, no conversion to PCM), Virtual
Surround has no effect on the audio
from the digital output. See pages 41-
42 for how to set up the
output
formats.
Settings
Virtual Surround
3 Press ENTER to make the setting and
exit the Audio Settings screen.
T i p
How good the surround effect is varies
with the disc.
l
You can also use the SURROUND
button on the remote control to switch
Virtual Surround on
E n