What's in the box, What’s, Putting the batteries in the remote control – GE DV-354 User Manual

Page 9: Using the remote control

Advertising
background image

What’s

in the box

Please confirm that the following accesso-
ries

.

.

.

are in the box when you open it.

Remote control

dry cell batteries x2

Audio/video cable (red/white/yellow

Power cable

These operating instructions

Warranty card

Putting the batteries in the
remote control

1

Open the battery compartment cover

on the back of the remote control.

2

Insert two

batteries into the

battery compartment following the
indications

inside the compart-

ment.

3 Close the cover.

Note

Don’t mix new and old batteries

together.

Don’t use different kinds of battery

together-although they may look

similar, different batteries may have
different voltages,

Make sure that the plus and minus ends
of each battery match the indications in

the battery compartment,

Remove batteries from equipment that
isn’t going to be used for a month or
more.

When disposing of used batteries,

please comply with governmental
regulations or environmental public
instruction’s rules that apply in your

country or area,

Using the remote control

Keep in mind the following when using the
remote control:

Make sure that there are no obstacles
between the remote and the remote
sensor on the unit.

The remote has a range of about 7

meters (23ft.)

Remote operation may become unreli-

able strong sunlight or fluorescent

light is shining on the unit’s remote

sensor.

Remote controllers for different devices

can interfere with each other. Avoid

using remotes for other equipment
located close to this unit.

Replace the batteries when you notice a

fall off in the operating range of the

remote.

Incorrect use of

can result in

hazards such as leakage and bursting.

Please observe the following:

E n

Advertising