Gateway ALR 8200 - Manual (Page 22)

12 Gateway ALR 8200 User’s Guide
Buttons
The following table shows the front panel buttons and their functions. See
Figure 2 on page 11 for the locations of the buttons.
Internal 3.5-inch drive bay
The system includes an internal 3.5-inch drive bay to accommodate a
3.5-inch IDE hard drive or other 3.5-inch device that does not need to be
accessed from outside the system.
LED indicators
The following table shows the front panel indicator LEDs and their
functions. See Figure 2 on page 11 for the locations of the indicator LEDs.
Switch Function
Power Turns the system ON or OFF.
Reset Allows you to reset the system without having to
power it off and then on again
Keyboard lock Enables or disables the keyboard functions and
clears the error flag after an ECC error. Pressing
this button does not correct the error condition. If
the error condition has not been corrected, the
LED will light again.
LED Meaning When Lit
Power The system is on.
Hard disk controller
activity The hard disk is being accessed.
P1 activity The first CPU is active.
P2 activity The second CPU is active.
ECC fault A memory error has been detected.
Power supply fault One of the power supplies has failed.
4078tl.book Page 12 Tuesday, December 22, 1998 2:19 PM