GE PJ1 - Manual (Page 48)

44 45 44 45
This camera has a build-in projector. Photos and movies can
be projected with simplicity.
To operate the projector, follow these steps:
1. Place the camera on a tripod or a stable surface such as a
table.
2. The projection range of the camera is between 20cm and
2.5m.
3. Press Power button to turn on the camera.
4. Press the projection button
, the camera will switch
to projector mode. In projection mode, the LCD screen is
turned off. Slide the projector focusing button to the left
and right to focus the projected image.
Use the camera to project directly
Projector Use
Project Focusing Slide Button
5. When projecting, The Left/Right button (located on the
back of the camera) can be used to select photos or movies
to be projected, the remote control unit can also be used
to select photos or movies.
IR Emitter IR Receiver
6. Press the Projection button again to end projecting.
The camera's projector drains the battery quickly.
Therefore it is recommended that external power be
used to operate the camera in projection mode.
Don’t take the battery out of the camera when using
external power to operate the camera.