GE PJ1 - Manual (Page 75)

72 73
Transmission
Connecting to a PC
Use the USB cable and ArcSoft software (CD-ROM) supplied
with your camera to copy (transfer) pictures to a computer.
Setting the USB mode
Since the camera’s USB port can be set to connect with either
a PC or a Printer, the following steps will allow you to ensure
that the camera is correctly configured to connect with a PC.
1. Enter the camera setup menu and select USB Mode with
the UP/Down button, then press the or the Right
button to enter.
2. Use the Up/Down navigation button and select PC.
3. Press the button to confirm the setting.
Transferring files to your PC
The computer will automatically detect the camera as a
removable drive. Double-click on the
My Computer icon
located on the desktop, then locate the removable drive and
copy folders and files in the drive to a directory on your PC as
you would copy any typical folder or file.
By using the USB cable, you can transfer the captured photos
and videos to a PC. Follow the steps below to connect the
camera to a PC.
1. Start a computer to which ArcSoft software has been
installed.
2. Make sure both the camera and PC are turned on.
3. Connect one end of the supplied USB Interface Cable to the
camera's Digital port. Please refer to page 8 item number
21.
4. Connect the other end of the USB Interface Cable to an
available USB port on your PC.