Grizzly 8" Jointer G0500 - Manual (Page 8)

-6- G0500/G1018/G1018HW 8" Jointers
We are proud to offer the Model
G0500/G1018/G1018HW. These 8" jointers are
part of a growing Grizzly family of fine wood-
working machinery. When used according to the
guidelines set forth in this manual, you can
expect years of trouble-free, enjoyable operation
and proof of Grizzly’s commitment to customer
satisfaction.
The main differences in the three models are
shown in the chart below. All three machines are
built with rugged steel cabinets and precision
ground cast-iron tables and fence assemblies.
For more complete information about each
machine, see
Section 9: Reference Info .
We are pleased to provide this manual with the
Model G0500/G1018/G1018HW. It was written to
guide you through assembly, review safety con-
siderations, and cover general operating proce-
dures. It represents our effort to produce the best
documentation possible.
If you have any comments regarding this manu-
al, please write to us at the address below:
Grizzly Industrial, Inc.
C /
O
Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our machines.
If you have any service questions or parts
requests, please call or write us at the location
listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G0500/G1018/G1018HW as supplied when the
manual was prepared. However, owing to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no oblig-
ation on the part of Grizzly. For your conve-
nience, we always keep current Grizzly manuals
available on our website at www.grizzly.com. Any
updates to your machine will be reflected in these
manuals as soon as they are complete. Visit our
site often to check for the latest updates to this
manual!
SECTION 2: INTRODUCTION
Read the manual before
assembly and operation.
Serious personal injury
may result if safety or
operational information
is not understood or fol-
lowed.
Description
Motor
Cutterhead
Table Size
Table
Adjustment
G0500
2 HP
4 Knife
75"
Handwheels
G1018
1 1 ⁄
2
HP
3 Knife
65"
Table Levers
G1018HW
1 1 ⁄
2
HP
3 Knife
65"
Handwheels