Grizzly G0633/G0634 User Manual
Page 38
Advertising
-36-
G0633/G0634 Jointer/Planer Combo Machine
Lead Screw: The lead screw should be lubri-
cated with multi-purpose grease once a month.
See
Figure 50 and Parts Beakdown, P0633411,
Page 61
for location. Remove the left side access
panel for ingress.
Figure 51. Fence lubrication locations.
Planer Column: Clean with solvent, wipe dry,
and relubricate with multi-purpose grease when
needed.
Worm Gear: Inspect every six months and lubri-
cate with multi-purpose grease when needed
(see
Parts Breakdown, P0633409). Remove
the worm gear box (see P0633407,
Page 61) to
inspect.
Figure 50. Planer column and lead screw.
Planer
Column
Lead
Screw
Fence: Lubricate with multi-purpose grease when
needed in the locations shown in
Figure 51.
Advertising