GE Calibur CBR-PB3-WD - Manual (Page 28)

Kalatel CBR-PB3-WD 28 0150-0261A
10.3 Manual HyperTerminal Configuration
q The configurable settings are:
o Protocol
o Baud Rate
o Parity
o # of Stop Bits
o Charcter Set
o POS Device Type
1. The following screen (or similar) will confirm that you are in HyperTerminal
programming mode.
2. Once HyperTerminal mode is set up, press the “Enter” key twice. The
following menu will appear:
To make a menu selection, enter the number of the element and press
“Enter”.
For example:
Input the following 2 ENTER (Port #2)
Initializing from DIP
Switches
Kalatel ProBridge III POS
Ver: 2.10
Camera: 16
Main Menu
1. Exit
2. Port #2
3. Backup