GE DECT 28861xx2 - Manual (Page 20)

0
5. Input the desired new PIN code and press menu/ok button, the screen displays
REPEAT PIN and prompts you to input the new PIN code again for verification.
NOTE: If the verification PIN code is different from the new PIN
code, the change will fail. You will be prompted to input a new PIN
code.
6. Input the new PIN code again and press menu/ok button to confirm the setting.
7. Press the button to return to idle mode.
Dial Mode
Set the dial mode to TONE or PULSE. The default setting is TONE.
1. Press the
menu/ok button.
. Press the 5 or 6 button to select SETUP BS and press the menu/ok button.
3. Press the 5 or 6 button to select DIAL MODE and press the menu/ok button.
3. Press the 5 or 6 button to select TONE or PULSE.
4. Press the menu/ok button to confirm the setting.
5. Press the button to return to idle mode.
Message Waiting (VMWI)
If you have subscribed to a voice message waiting service, MESSAGE WAITING
displays on handset and the icon displays on the base to alert you that you have
received new messages.
To turn the Visual Message Waiting Indication (VMWI) off via the handset;
1. Press the
menu/ok button.
. Press the 5 or 6 button to select SETUP BS and press the menu/ok button.
3. Press the 5 or 6 button to select VMWI and press the menu/ok button.
The screen displays VMWI OFF?’.
4. Press the menu/ok button to confirm the setting.
5. Press the button to return to idle mode.
NOTE: This service requires a subscription through your local
service provider.