Installation, Telephone jack requirements, Digital security system – GE DECT 28861xx2 User Manual

Page 7: Important installation guidelines

Advertising
background image

7

Telephone Jack Requirements

To use this phone, you need an RJ11C type modular telephone

jack, which might look like the one pictured here, installed in your

home. If you don’t have a modular jack, call your local phone

company to find out how to get one installed.

Installation

Digital Security System

Your cordless phone uses a digital security system to protect against false ringing,

unauthorized access, and charges to your phone line.

INSTALLATION NOTE: Some cordless telephones operate at

frequencies that may cause or receive interference with nearby TVs,

microwave ovens, and VCRs. To minimize or prevent such interference,

the base of the cordless telephone should not be placed near or on

top of a TV, microwave ovens, or VCR. If such interference continues,

move the cordless telephone farther away from these appliances.

Certain other communications devices may also use the 1.9 GHz

frequency for communication, and, if not properly set, these

devices may interfere with each other and/or your new telephone.

If you are concerned with interference, please refer to the owner’s

manual for these devices on how to properly set channels to avoid

interference. Typical devices that may use the 1.9 GHz frequency

for communication include wireless audio/video senders, wireless

computer networks, multi-handset cordless telephone systems, and

some long-range cordless telephone systems.

Important Installation Guidelines

• Avoid sources of noise and heat, such as motors, fluorescent lighting,

microwave ovens, heating appliances and direct sunlight.

• Avoid areas of excessive dust, moisture and low temperature.
• Avoid other cordless telephones or personal computers.
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically

designed for wet locations.

• Never touch non-insulated telephone wires or terminals, unless the telephone

line has been disconnected at the network interface.

• Use caution when installing or modifying telephone lines.

Modular

telephone

line jack

Wall plate

Advertising
This manual is related to the following products: