Goodmans GFSAT200HD/A - Manual (Page 17)

Other
Display & Audio Network Language Parental Other
R Exit Menu
. Show Non Freesat Channels
Auto Standby
Upgrade Software
Tue 29 Jun 10:53am Settings
Select EXIT OK
No
Add Non Freesat Channels
First Time Installation
Power Save in Standby Mode
Show Non Freesat Channels - This setting
allows you to see the manually added free to air
channels in the channel list.
DON’T FORGET! The default setting is not to
show manually added free to air channels.
Free to air channels are not added to the
programme guide.
Auto Standby - This will put the digital box into
standby if there has been no user activity for
four hours. A thirty second countdown is shown
on screen, to give the user the option to cancel
going into standby.
Power Save in Standby Mode - This setting
reduces the amount of energy used when in
standby mode.
Add Non Freesat Channels - See page 19 for
further instructions.
First Time Installation - This setting allows you
to perform a first time installation. Follow the
instructions on-screen to setup your digital box.
DON’T FORGET! A first time installation will
remove all non freesat channels.
08
17
The settings menu
Goodmans GFSAT200HD-A_IB_Rev2_120710.indd 17 12/07/2010 14:11:27