Site considerations, Clean up – Grizzly G0514X3 User Manual

Page 21

Advertising
background image

G0513X/G0514X/G0514X3 Extreme Series Bandsaw

-19-

Figure 9. G0513X minimum working clearances.

Floor Load

Refer to the

Machine Data Sheet for the weight

and footprint specifications of your machine.
Some

floors may require additional reinforcement

to support both the machine and operator.

Working Clearances

Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your new machine. See

Figures 9 & 10 for the

minimum working clearances.

Site Considerations

���

���

Figure 10. G0514X and G0514X3 minimum

working clearances.

���

���

The unpainted surfaces are coated with a waxy
oil to protect them from corrosion during ship-
ment. Remove this protective coating with a sol-
vent cleaner or citrus-based degreaser such as
Grizzly’s G7895 Degreaser. To clean thoroughly,
some parts may need to be removed.

For opti-

mum performance from your machine, make

sure you clean all moving parts or sliding

contact surfaces that are coated. Avoid chlo-
rine-based solvents, such as acetone or brake
parts cleaner, as they may damage painted sur-
faces should they come in contact. Always follow
the manufacturer’s instructions when using any
type of cleaning product.

Clean Up

Gasoline and petroleum

products have low flash

points and could cause

an explosion or fire if

used to clean machinery.

DO NOT use gasoline or

petroleum products to

clean the machinery.

Many of the solvents

commonly used to clean

machinery can be toxic

when inhaled or ingest-

ed. Lack of ventilation

while using these sol-

vents could cause seri-

ous personal health risks

or fire. Take precautions

from this hazard by only

using cleaning solvents

in a well ventilated area.

Advertising