Grizzly G0514X3 - Manual (Page 35)

G0513X/G0514X/G0514X3 Extreme Series Bandsaw
-33-
Guide Post
Lock Knob
Guide Post
Handwheel
The START/STOP switch on the Model G0513X/
G0514X/G0514X3 is located on the column for
easy access (
Figures 37 & 38). Immediately
turn the machine OFF if there becomes a safety
hazard.
START/STOP Switch
Figure 37. G0513X START/STOP switch.
To adjust guide post:
1. Make sure that the blade tension, blade
tracking, support bearing, and blade guides
are adjusted correctly.
2. Loosen the guide post lock knob shown in
Figure 39.
3. Turn the guide post handwheel to raise or
lower the guide post until the upper blade
guide assembly is within 1" from the top of
the workpiece.
4. Lock the guide post in place with the lock
knob.
Guide Post
Figure 39. Guide post controls.
The guide post, shown in Figure 39, connects
the upper blade guide assembly to the bandsaw.
The guidepost allows the blade guide assembly
to move up or down via a rack and pinion. In order
to cut accurately, the blade guide assembly must
be no more than 1" from the top of the workpiece
at all times—this positioning provides the best
support for the blade.
Figure 38. G0514X/G0514X3 START/STOP
switch.
The Model G0514X/G0514X3 features a switch
disabling lock to prevent unauthorized starting of
the machine. To disable the switch, turn the key to
"0". To enable the switch, turn the key to "1".