GE MULTILINK 1601-9026-A3 User Manual
Page 65
Advertising
QUICKSTART GUIDE
MULTILINK ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE
61
Z
Select the Transfer menu item and choose the Send File option.
Z
Enter the location of the configuration file and select Xmodem for
the protocol.
Z
Click on the Send button.
The file will start to load as shown below:
Z
Once the transfer is complete, the switch will have to be rebooted
either by entering Reboot or by switching the power off then on.
ML800/1200/1600/2400# reboot
Proceed on rebooting the switch? [Y or N] Y
Rebooting now...
Z
Once the switch has rebooted, login and verify that the configuration
was loaded correctly.
This completes the upgrade process.
Advertising