Grizzly H0770 - Manual (Page 3)

-3-
h0770 5-shelf Cart
7. slide each center shelf onto a pair of hori-
zontal supports, align the mounting holes in
the shelves and supports, then fasten with
M6-1 x 25 carriage bolts, flat washers, lock
washers, and hex nuts, as shown in
figure
7. Finger tighten bolts for now.
note: It may help to use a hammer to seat
the carriage bolts more deeply—making it
easier to thread on the washers and hex
nuts.
figure 7. Center shelves installed.
If you need help with your cart, call our Tech
Support at: (570) 546-9663.
9. tighten the hex bolts that fasten the bottom
shelf to the handles, then final tighten all fas-
teners.
figure 9. top shelf installed.
x 4x 4
x 12
8. repeat step 7 to install the top shelf (see
figure 9).
figure 8. using clamp to align mounting holes.
—if you have trouble inserting a carriage bolt
through a shelf and horizontal support, the
mounting holes may not be aligned. loosen
the hex bolts that secure the handles to the
base and adjust the mounting holes, or
use a clamp with a wood block to align the
mounting holes, as shown in
figure 8.