Grizzly T21347 - Manual (Page 6)

t21347 2" nailer Kit -4 -
introduction
if you have any comments regarding this
manual, please write to us at the following
address:
grizzly industrial, inc.
C/o technical documentation Manager
p.o. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our
tools. if you have any service questions or
parts requests, please call or write us at
the location listed below.
grizzly industrial, inc.
1203 lycoming Mall Circle
Muncy, pA 17756
phone: (570) 546-9663
Fax: (800) 438-5901
e-Mail: [email protected]
Web site: http://www.grizzly.com
We are proud to offer the grizzly Model
t21347 2" nailer Kit. this model is part
of a growing grizzly family of fine pneu-
matic tools. When used according to the
guidelines set forth in this manual, you
can expect years of trouble-free, enjoyable
operation and proof of grizzly’s commit-
ment to customer satisfaction.
the Model t21347 features a 360° exhaust
port, comfort grip rubber handle, and eco-
nomical air consumption with low noise.
the specifications, details, and photo-
graphs in this manual represent the Model
t21347 as supplied when the manual was
prepared. however, owing to grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of grizzly.
foreword contact info
specifications
nail size ......................................18 gauge
nail length ........................................
5 ⁄
8
"–2"
Magazine Capacity ...................... 100 nails
Air inlet ...........................................¼" npt
Weight .............................................3.8 lbs.
operating pressure ..................60–100 psi