Garmin Edge 500 - Manual (Page 24)

0 Edge 500 Owner’s Manual
ANT+ Sensors
ANT+ Sensors
The Edge is compatible with the
following ANT+ accessories:
Heart rate monitor ( page 21 )
GSC 10 speed and cadence sensor
( page 25 )
Third-party ANT+ sensors
( page 30 )
For information about purchasing
additional accessories, go to
http://buy.garmin.com .
Tips for Pairing ANT+
Sensors with Your Garmin
Device
Make sure that the ANT+ sensor
is compatible with your Garmin
device.
Before you pair the ANT+ sensor
with your Garmin device, move
•
•
•
•
•
10 m away from other ANT+
sensors.
Bring the Garmin device within
range (3 m) of the ANT+ sensor.
After you pair the first time, your
Garmin device automatically
recognizes the ANT+ sensor each
time it is activated. This process
occurs automatically when you
turn on the Garmin device and
only takes a few seconds when
the sensors are activated and
functioning correctly.
When paired, your Garmin device
only receives data from your
sensor, and you can go near other
sensors.
•
•
•