Before starting the engine, Add oil, Add gasoline – Generac 7000exl User Manual

Page 5

Advertising
background image

Generac Portable Products 7000EXL Extended Life Generator

5

BEFORE STARTING THE

ENGINE

Add Oil

CAUTION!

Any attempt to crank or start the engine

before it has been properly filled with the recommended
oil may result in an engine failure.

To fill your engine with oil:

• Place generator on a level surface.

• Follow the oil grade recommendations and oil fill

instructions given in the engine owner’s manual.

NOTE: The generator’s revolving field rides on a
prelubricated and sealed ball bearing that requires no
additional lubrication for the life of the bearing.

Add Gasoline

WARNING!

Never fill fuel tank indoors. Never

fill fuel tank when engine is running or hot. Do Not
light a cigarette or smoke when filling the fuel tank.

WARNING!

Do Not overfill the fuel tank.

Always allow room for fuel expansion.

• Use regular UNLEADED gasoline with the generator

engine. Do Not use premium gasoline. Do Not mix oil
with gasoline.

• Clean area around fuel fill cap, remove cap.

• Slowly add unleaded regular gasoline to fuel tank. Be

careful not to overfill. Allow about 1/2" of tank space for
fuel expansion (Figure 3).

• Install fuel cap and wipe up any spilled gasoline.

IMPORTANT: It is important to prevent gum deposits
from forming in essential fuel system parts, such as the
carburetor, fuel filter, fuel hose or tank during storage. Also,
experience indicates that alcohol–blended fuels (called
gasohol, ethanol or methanol) can attract moisture, which
leads to separation and formation of acids during storage.
Acidic gas can damage the fuel system of an engine while in
storage. Be sure to review the precautions given in
“Storage” on page 13.

Never use engine or carburetor cleaner products in the
fuel tank or permanent damage may occur.

Figure 3 — Typical Fuel Expansion Space

Advertising