Grizzly G0461 - Manual (Page 18)

-16-
G0460/G0461 12" Sliding Table Saw
Figure 11. Extension table components.
A B
C
Inventory
After all the parts have been removed from the
two boxes, you should have the following items
included with the base unit of the saw:
Inventory ...................................................... Qty
A. Large Extension Wing ................................ 1
B. Small Extension Wing w/Set Screws ......... 1
C. Support Leg w/Hex Bolt & Nut ................... 1
D. Round Rail w/M12 Studs,
Washers, and Nuts ..................................... 1
E. Square Tube w/Scale ................................. 1
F. Aluminium Rip Fence ................................. 1
G. Rip Fence Body .......................................... 1
Figure 12. Rip fence components.
D
E
G
F
The unpainted surfaces are coated with a waxy
oil to prevent corrosion during shipment. Remove
this protective coating with a solvent cleaner or
citrus-based degreaser such as Grizzly’s G7895
Citrus Degreaser. To clean thoroughly, some parts
must be removed.
For optimum performance
from your machine, clean all moving parts or
sliding contact surfaces. Avoid chlorine-based
solvents, such as acetone or brake parts cleaner
that may damage painted surfaces. Always follow
the manufacturer’s instructions when using any
type of cleaning product.
Clean Up
Gasoline and petroleum
products have low flash
points and can explode
or cause fire if used to
clean machinery. DO
NOT use these products
to clean the machinery.
Many cleaning solvents
are toxic if inhaled.
Minimize your risk by only
using these products in a
well ventilated area.
G7895—Grizzly Citrus Degreaser
This natural, citrus-based degreaser is a great
solution for removing export grease, and it’s much
safer to work around than nasty solvents.
Figure 10. Grizzly citrus degreaser.