Grizzly G0462 - Manual (Page 17)

g0462 Wood Lathe (mfg. since 3/10)
-15-
To mount the lathe to the stand:
1. stand the legs up approximately 41" apart,
then get them reasonably aligned, as shown
in
figure 10.
Assembly
figure 10. stand legs approximately 41" apart to
prepare for mounting the lathe.
4. install the tool rest lock lever to secure the
tool rest, as shown in figure 12.
2. use the help of additional people to care-
fully lift the lathe onto the legs and align the
mounting holes.
Note: The headstock end is the heaviest
and usually requires two people lifting at that
end.
figure 12. installing handle into tool rest.
figure 11. securing lathe to the stand leg.
x 8
3. secure the lathe to the legs with the (8)
m8-1.25 x 35 cap screws and 8mm lock
washers, as shown in
figure 11.