Grizzly G0462 - Manual (Page 31)

g0462 Wood Lathe (mfg. since 3/10)
-29-
figure 45. model h6542 robert sorby 8-pC set.
H6542—Robert Sorby HSS 8-pc Turning Set
if quality is king, then start bowing. made in
england, these robert sorby lathe tools are espe-
cially for the perfectionist wood turner. includes
3 ⁄
4
" roughing gouge, 3 ⁄
8
" & 1 ⁄
2
" spindle gouge, 3 ⁄
8
"
bowl gouge, 3 ⁄
4
" standard skew, 3 ⁄
16
" diamond
side cut scraper, 1" square scraper and 1 ⁄
2
" round
scraper. Full size handles are 16"–19".
figure 46. model g9863 8-pC Chisel set.
G9863—8-pc HSS Lathe chisel Set
this chisel set features beautiful 8" ash handles
with brass ferrules and 3
1 ⁄
2
" long, high speed
steel blades. Chisels include: 1 ⁄
2
" parting tool,
1 ⁄
2
" straight chisel, 1 ⁄
2
" double bevel skew, 1 ⁄
2
"
roundnose, 3 ⁄
4
" gouge, 3 ⁄
8
" gouge, 1 ⁄
2
" diamond
point and 3 ⁄
8
" veiner. set comes in fitted wooden
case, and is very competitively priced!
figure 47. swan neck hollowing tools.
H0507—20" Swan Neck Hollowing Tool
H0508—24" Swan Neck Hollowing Tool
An excellent choice for blind turning or undercut-
ting where reach is restricted. h0507 is designed
for end grain use while h0508 (with a more sub-
stantial steel cross section) is designed for both
end grain and side grain (bowl) use.
figure 48. robert sorby stebcentre.
H5954—Robert Sorby Stebcentre MT#2
razor sharp teeth bite into the workpiece for
secure operation and the spring loaded center
point controls the amount of drive or slip. this pat-
ented feature helps avoid the problem of "dig-in."
production turners can also load and unload their
work while the lathe is still running!
H6204—precision Drill chuck 1 ⁄
32
"– 5 ⁄
8
" x JT#3
G1676—Drill chuck Arbor MT#2 x JT#3
the best way to bore holes with your lathe!