Goodmans GFMTDAB10 - Manual (Page 6)

6
Attach the unit to the mount
Slide the clip on the back of the unit onto the windscreen mount. Adjust the mount for
the best view of the unit.
Attach the Power cable
The power cable is a miniature USB socket on the bottom of the unit. Attach one end to
the unit and plug the other end into a 12 volt lighter socket.
When the unit powers up for the first time, or after a factory RESET, it will perform a full
scan for DAB stations after displaying the best FM frequency. Tune your car radio to the
frequency shown.
03
V1.0
GFMTDAB10
03 FM
87.60
03
SCAN 12A
Found : 15
03
DAB P1 13:25
BBC R5
If there are no DAB stations within range, the display will show:
DAB
NO DAB
4
5
Get Going 02