Goodmans GFMTDAB10 - Manual (Page 7)

7
Switching On
When the unit is plugged into the car
supply it switches on automatically.
Listening to DAB
If no DAB stations have been
previously stored, the unit will
perform a full scan. The following
screen will be displayed. A bar
graph indicates the progress of the
scan – the number of stations
increasing as the scan progresses.
03
SCAN 12A
Found : 15
Progress Bar Current Multiplex block frequency
Number of stations found
When the scan is complete, the
unit will select the first station
available - stations are listed in
numeric then alphabetic order. The
station list is retained in the unit’s
memory so that next time you use
the unit it does not perform a
station scan, but selects the last
station you listened to. If there are
no stations found, check that DAB
coverage exists in the area you are
in.
Changing DAB stations
Rotate the scroll wheel to scroll
through the stations in the station
list. Press the SELECT button to
confirm. The unit will tune to the
new station.
DON’T FORGET! If no new
station is selected the unit will
display the currently playing
stations after 5 seconds.
From time to time, and as you
travel around, new DAB
stations may become available.
If you wish to see if any new
stations are available, perform a
DAB scan.
Daily Use 03
The DAB SCAN button enables the
unit to perform a full or a UK scan.
A short press performs a UK scan
(Channels 10A to 12D) and a long
press performs a full Band III scan
(Channels 5A to 13F)
DAB Scan
1
2
Daily Use 03