Installation, Installing the wiring harness – Garmin 240 User Manual
Page 14
Advertising
6
Installation
Wiring Harness Installation (continued)
If your boat does not have a fuse block, the unit can be wired directly
to the battery. Make sure the 2-Amp in-line fuse supplied with the unit
is installed.
The Fishfi nder 240 can be connected to another piece of NMEA com-
patible electronic equipment. If equipped with a capable transducer, the
Fishfi nder 240 sends depth, temperature and speed information that could
be displayed on another device.
2-Amp In-Line Fuse
Connecting a Transducer to Multiple Sensors
Installing the Wiring Harness
Speed
Temp
Transducer
Power/Data
Connection
190-00155-10 Rev A.indd
08/16/00, 2:46 PM
6
Advertising