Grizzly G0583 - Manual (Page 12)

-10- G0583 1 HP Canister Dust Collector
Your machine left our warehouse in two care-
fully packed boxes. If you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663 for advice.
Save the containers and all packing materials
for possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of the shipment, you should inventory the
equipment.
Wear safety glasses dur-
ing the entire set up pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire man-
ual to become familiar
with the controls and
operations BEFORE
starting the machine!
After all the parts have been removed from the
two boxes, you should have the following items:
Box 1: Canister Components (Figure 3)
A. Canister Filter ............................................. 1
B. Gasket Bag ................................................. 1
— Wide Foam Strip .................................... 1
— Narrow Foam Strip ................................. 1
C. Canister Filter Cleaning Handle ................. 1
D. Metal Canister Clamp ................................ 1
Figure 3. Canister filter box components.
Unpacking
SECTION 3: SET UP
A
C
B D
The Model G0583 is a
heavy machine (approxi-
mately 60 lbs. shipping
weight). DO NOT over-
exert yourself while
unpacking or moving
your machine—get assis-
tance.
QTY
Items Needed For
Set Up
Items Needed for Setup
Hex Wrench 3mm ...............................................1
Wrench or Socket 12mm ....................................1
#2 Phillips Screwdriver .......................................1
QTY
Inventory