GE EPM9450Q - Manual (Page 146)

138 PMCS Interface Toolkit
Setup 2 Tab
EPM 7500/7600 Meter - Setup 2 Tab
The Setup 2 tab displays the following demand values from the EPM 7500/7600.
Sliding Window Demand Settings
• Sliding Demand Sub Interval Settings for KW, KVAR, KVA, and Iavg.
• Sliding Demand Number of Sub Intervals for KW, KVAR, KVA, and
Iavg.
• Sliding Demand Predicted Response for KW, KVAR, KVA, and Iavg.
Waveform Recorder Settings
• Depth of Waveform Recorder
Sag / Swell / Transient Settings
• Sag / Swell Nominal
• Sag Limit
• Swell Limit
• Change Criteria
Relative Setpoint Settings
• Nominal value for Over KW, Over Current, and Over Vunbal.
• Under Dropout for Over KW, Over Current, and Over Vunbal.
• Over Dropout for Over KW, Over Current, and Over Vunbal.
• Under Pickup for Over KW, Over Current, and Over Vunbal.