GE EPM9450Q - Manual (Page 206)

198 PMCS Interface Toolkit
565 Feeder Management Relay
The 565 Tabular Data Screen wizard has the following buttons on the Command tab:
Tab Button Function
Command Maint Data Clears the maintenance data
Operation Data Clears the operation data
Amp Demand Clears the amp demand registers
KW Demand Clears the kW demand registers
KVAR Demand Clears the kVAR demand registers
Events Clears the events table
Energy Clears the energy used data
Reset Keypad Performs a keypad reset
End of Relay Test Ends the relay test
End of LED Test Ends the LED test
End of Analog Output Test Ends the analog output test
Test LCD Display Sends a test pattern to the LCD
Test LEDs Starts the LED test
Table 27. 565 Tabular data screen commands.
The Setup 2 tab has two data input areas. Analog Input Title creates a user label for
the analog input used in the device. Analog Input Units performs the same function
for the units of the analog input. These labels appear on the Metering tab and on the
Large Faceplate wizard when the analog input is displayed. The analog input can be