Grizzly G1023 - Manual (Page 9)

-8- G1023 Heavy-Duty Table Saw
Beginning Assembly
Most of your Model G1023 Table Saw has been
assembled at the factory, but some parts must be
assembled or installed after delivery. We have
organized the assembly process into steps.
Please follow along in the order presented here.
Note: All die-cut metal parts have a sharp edge
(called “flashing”) on them after they are formed.
This is removed at the factory. Sometimes,
though, a bit of flashing might escape inspection.
Please examine the edges of all metal parts
before handling them.
TOOLS REQUIRED: A high quality square and
long straightedge plus common hand tools are
necessary to assemble this machine. You will
need a set of open and closed ended metric
wrenches, a flat tipped screwdriver, Phillips
screwdriver, dead blow hammer, and a 6" or 8"
adjustable wrench.
Hand Wheels
The handle on the arbor tilting hand wheel has
been installed backward for shipping.
Unscrew it and then reinstall it in the correct posi-
tion.
Figure 2.
SECTION 3: ASSEMBLY
Figure 2.