Troubleshooting – Grizzly H3118 User Manual
Page 19
Advertising
H3118 Tile Saw
-17-
Review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel-
ops. If you need replacement parts or you are unsure of your repair skills, then feel free to call our Technical
Support at (570) 546-9663.
SECTION 6: SERVICE
Troubleshooting
Motor & Electrical
Symptom
Possible Cause
Possible Solution
The motor gets hot.
1. The ventilation slots in the motor are blocked
with dust.
1. Clean the ventilation slots.
The machine does
not work.
1. The disabling key is not installed.
2. The power supply source is being inter-
rupted.
1. Insert disabling key in power switch.
2. Check power supply cord connection and/or break-
er.
Advertising