Geemarc AMPLIDECT 350 - Manual (Page 25)

24
Receiving a Call
When a call is received, the New Call information will
appear. If the caller can be identified, the caller's phone
number is displayed. If the caller cannot be identified,
only the New Call information displays. If you have a
voice message, the icon and "MSG WTG ON" will
be shown on the LCD.
1. To answer the call, press the key. If you have
activated the Auto Answer function, when the handset is
on the base, simply lift it up to answer.
2. To end the call, either press the key or replace
the handset on the base.
Result: After you hang up the call, the LCD displays the
call duration.
Notes: You can select the ringer volume by using the
or key when the phone rings with an
incoming call.
If you want to deactivate the icon, press the
key in standby mode, then press and hold the key.
After that, press the key to return to standby mode.
(The handset must be registered to the base.)
BASIC FUNCTIONS