Geemarc AMPLIDECT 350 - Manual (Page 61)

60
Flash Time
You can select to change the Flash time by the
following steps:
1. Press the Menu soft key.
2. Press or key to choose BS Settings,
then press the Select soft key.
3. Use or key to choose Flash Time menu.
Press the Select soft key.
4. The display shows the current setting. Use the
or key to select Flash-1(100ms:UK and
European countries) /Flash-2(300ms:France), press
the Save soft key.
Modify PIN
This function allows you to change the PIN number of the
currently active Base. The default PIN is 0000.
1. Press the Menu soft key.
2. Press or key to choose BS Settings,
then press the Select soft key.
3. Use or key to choose Modify PIN menu,
press the Select soft key.
ADVANCED FUNCTIONS