GE ZET2R - Manual (Page 17)

17
How to set
the oven for
roasting
when using
the probe
Using the Probe for Roasting
Wall Oven
OR
U PPER
O VEN
L OWER
O VEN
S TART
E NTER
0 9 8 7 6
5 4 3 2 1
0 9 8 7 6
5 4 3 2 1
P ROBE
OK
B AKE
E NTER
On double oven models only.
1 Insert the probe into the food. See the Using the Probe section.
2 Plug the probe into the outlet in the oven. Make sure it’s pushed all
the way in. Close the oven door.
3 Touch PROBE.
4 For double oven models only, touch UPPER OVEN or LOWER
OVEN to select the desired oven.
5 Touch OK.
6 Touch the numbers to set the desired internal food or meat
temperature. (The maximum internal temperature for the
food that you can set is 200°F.)
7 Touch ENTER.
8 Touch BAKE.
9 Touch the numbers to set the desired oven temperature.
10 Touch ENTER.
11 Touch START.
The oven will turn on immediately and stay on until the oven is
turned off.
The convection fan will turn on (after a short delay) and 100°F will
appear in the screen. (The temperature display will start to change once
the internal temperature of the meat reaches 100°F.)
After the internal temperature of the meat reaches 100°F, the changing
internal temperature will be shown in the display.
12 When the internal temperature of the meat reaches the number
you have set, the probe and the oven turn off and the oven control
signals. To stop the signal, touch the CLEAR/OFF pad. Use hot pads
to remove the probe from the food. Do not use tongs to pull on it—
they might damage it.
For double oven models only , to set the second oven, select PRESS TO
MAKE LOWER OVEN SELECTIONS or PRESS TO MAKE UPPER
OVEN SELECTIONS as needed and follow the above steps.
The set temperature may be changed by touching CHANGE
TIME-TEMP
for the appropriate oven.
The settings may be cancelled by touching CANCEL for the appropriate
oven.
The timer can be set by touching SET KITCHEN TIMER.
See the Kitchen Timer section.
CAUTION:
To prevent possible burns, do not unplug the probe
from the oven outlet until the oven has cooled. Do not store the probe in the oven.
• If the probe is removed from the food before the final temperature is reached, a tone
will sound and the screen will prompt until the probe is removed from the oven.
• You can use the timer even though you cannot use timed oven operations.