Grizzly G0489 - Manual (Page 18)

-16-
G0489 Metalworking Sander
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Rests
Operation Safety
The Model G0489 comes with two rests. A fixed
rest sits just above the spark trap. The second
sits above the platen and can be adjusted for use
or to move it out of the way when closing the belt
guard (see
Figure 15).
SECTION 4: OPERATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Angle Adjustment
The sander can be angled up and down to meet
your needs. Use the angle adjustment lever
shown in
Figure 14 to lock the sander in the angle
you choose. Tighten securely so the sander will
not move during operation.
Figure 14. Angle adjustment lever.
Rest
Fixed Rest
Figure 15. Rest locations.
Angle Adjustment Lever