GarrettCom Magnum 10Mb/s - Manual (Page 38)

Magnum 10Mb Media Converters Installation and User Guide (07/98)
GARRETT
31
3.3.2 Connecting ThinNet 10BASE2
Connect the ThinNet coax cable to the BNC connector on the TB15 Media
Converter in the same manner as is done for any standard BNC connection. Be sure that
the BNC segment is properly terminated using a standard “T” connector and terminator.
3.3.3 Connecting Fiber Optic multi-mode, single mode
The following procedure applies to 10BASE-FL multi-mode and single mode
applications using the TF15, TF15s, TF15SC, TF15LP and TF15-hdx Media Converters.
All have ST-type fiber connectors, except the TF15SC which has SC-type connectors.
The TF15s single-mode differs from the other fiber media converters in terms of
the maximum distance allowed. The others are used for a multi-mode fiber segment
lengths of up to 2km. The TF15s is used for single-mode fiber segments of up to 10km
in length. The following table is provided for general information: