The pr oblem solver – GE 49-8726 User Manual

Page 41

Advertising
background image

41

The Pr

oblem Solver

PROBLEM

POSSIBLE CAUSE

OVEN WILL NOT WORK

• Plug on range is not completely inserted in the electrical outlet.

• The circuit breaker in your house has been tripped, or a fuse has been blown.

• Oven controls not properly set.

• Door left in locked position after cleaning.

OVEN LIGHT DOES

• Light bulb is loose or defective. Tighten or replace.

NOT WORK

FOOD DOES NOT

• The OVEN SET knob not set at BROIL. Make sure you turn the knob all the

BROIL PROPERLY

way to the BROIL position.

• The OVEN TEMP knob not set at BROIL. Make sure you turn the knob all

the way to the BROIL position.

• Door not left open to the broil stop position as recommended.

• Improper shelf position being used. See the Broiling Guide.

• Food is being cooked on hot pan.

• Cookware is not suited for broiling.

• Aluminum foil used on the broil pan grid has not been fitted properly and

slit as recommended.

FOOD DOES NOT ROAST

• The OVEN SET knob not set at BAKE.

OR BAKE PROPERLY

• The OVEN TEMP knob not set at proper temperature.

• Oven shelf is not level.

• Incorrect cookware or cookware of improper size is being used.

• Oven thermostat needs adjustment. See the Adjust the Oven Thermostat—

Do It Yourself section.

OVEN DOOR

• Because the oven door is removable, it sometimes gets out of position

IS CROOKED

during installation. To straighten the door, push down on the high corner.

OVEN DOOR

• Turn the OVEN TEMP knob to OFF. Allow oven to cool.

ACCIDENTALLY LOCKED

Never force the door latch handle.

DURING COOKING

OVEN DOOR WILL

• Oven must cool below locking temperature.

NOT UNLOCK

OVEN NOT CLEAN

• Oven controls not set properly.

AFTER CLEAN CYCLE

• Heavily soiled ovens may need to self-clean again or for a longer period.

• Heavy spillovers should be cleaned before starting clean cycle.

(continued next page)

Advertising
This manual is related to the following products: