GE Electric Coil & Radiant JBP22 - Manual (Page 16)

Operating
Instructions
Safety Instructions
Care and Cleaning
Installation Instructions
Tr
oubleshooting T
ips
Consumer Support
16
Not all features are on all models.
Using the clock and timer.
(on some models)
To Reset the Timer
If the display is still showing the time
remaining, you may change it by touching
the KITCHEN TIMER ON/OFF or TIMER
ON/OFF pad, then touch the + or – pads
until the time you want appears in the
display. If the remaining time is not in the display
(clock, delay start or cooking time are in
the display), recall the remaining time by
touching the KITCHEN TIMER ON/OFF or
TIMER ON/OFF pad and then touching the
+ or – pads to enter the new time you want.
To Cancel the Timer
Touch the KITCHEN TIMER ON/OFF
or TIMER ON/OFF pad twice.
End of Cycle Tones (on some models)
Clear the tones by pressing the pad of the
function you are using.
Power Outage
If a flashing time is in the display, you have
experienced a power failure. Reset the clock. To reset the clock, touch the CLOCK pad
twice. Enter the correct time of day by
touching the + or – pads. Touch the
START/ON pad.
or
or