Geemarc Dallas 30 - Manual (Page 10)

If you are using this telephone with a hearing aid, please set your hearing
aid to the <<T>> position
Making a Call
Pick up handset.
When you hear dialing tone, dial the number on the keypad. The
number will be displayed in the middle of the LCD display. The X
button can be used to correct an incorrect entry. The maximum
number of digits that can be dialled out is 32
To end the call simply replace the handset in the cradle
Making a Call – Hands Free
Dial the number on the keypad in the on-hook position. The X
button can be used to correct an incorrect entry
Press

and the number will be dialled automatically
When the third party answers the call, you may speak with the
telephone in the hands free mode ( handset in the cradle)
To end the call press

Note: To deactivate the Hands Free function during a call, lift the handset.
To activate the Hands Free function during the call, press and hold

and
replace the handset on the cradle at the same time.
Receiving a Call
When an incoming call is received the telephone rings and the ringer LED
indicator will flash. If the caller can be identified (due to subscription to a
Caller Display service), the caller’s telephone number and name (provided
that the number and name stored are in the phonebook) will be displayed.
The total calls counter increases by 1. If the telephone call is not
answered the new call counter increases by 1 and the new call LED starts
flashing.
Lift the handset and speak
To end the call simply replace the handset in the cradle
Receiving a call – Hands Free
Press

to speak hands free
To end the call press

Last Number Redial
Lift the handset or press

for hands free use
Press /P to redial the last number dialled
USING THE TELEPHONE USING THE TELEPHONE
17 18 17