Geemarc Dallas 30 - Manual (Page 13)

View Caller Display List
Use

or

to scroll through the caller display list. The NEW call
counter will decrease by the number of unreviewed entries viewed
Notes: At the end of the caller display list the LCD display will display
END OF LIST . If there are no caller display telephone numbers in the
caller display list, NO CALL is displayed
Dial a Number from the Caller Display List
Lift the handset or press

to get a dial tone
Use

or

to scroll through the caller display list until you find the
telephone number you wish to dial
Press OK to automatically dial the telephone number
Or
In the on-hook position use

or

to scroll through the caller
display list until you find the telephone number you wish to dial
Lift the handset or press

to automatically dial the telephone
number
Note: The Callback function cannot work correctly if you are using the
Dallas 30 with a PBX unless you have set the PBX dial prefix as described
in the PBX Dial Prefix section found in the Settings chapter.
Delete an Entry from the Caller Display List
Use

or

to scroll through the caller display list until you find the
telephone number you wish to delete
Press X
You will be prompted to confirm the deletion
‘ DELETE CALL?’
Confirm by pressing X again. The TOTAL call counter will decrease
by 1. The NEW call counter may decrease by 1 if this was an
unreviewed entry
Note: If you do not confirm by pressing X again, the Dallas 30 will revert
to standby after 5 seconds
Delete All Entries from the Caller Display List
Use

or

to scroll through the caller display list until you find the
telephone number you wish to delete
Press X for a long period of time until ‘ DEL ALL
CALLS?’ is displayed
Confirm by pressing X again. The TOTAL and NEW call counter will
be reset to 0
Note: If you do not confirm by pressing X again, the Dallas 30 will revert
to standby after 5 seconds
CALLER DISPLAY CALLER DISPLAY
23 24