Grizzly G0518 - Manual (Page 18)

-16- G0518 Drum / Flap Sander
Figure 9. Attaching one of the dust hoods.
Dust Hoods
To attach the dust hoods to the brackets:
Attach the dust hoods to the brackets with (4) M8-
1.25 x 40 cap screws, (4) M8 flat washers and (4)
M8 lock washers (
Figure 9 ).
Figure 10. Attaching one of the
acrylic eye shields.
Acrylic Eye Shields
To attach the acrylic eye shields to the dust
hoods:
Loosely attach the acrylic eye shields to the dust
hoods with (4) M8-1.25 x 20 cap screws, (4) M8
flat washers and (4) M8 lock washers (
Figure
10 ). Final tighten the cap screws carefully as to
not break the acrylic eye shields. Note– Match the
correct acrylic eye shield to each dust hood by
aligning the mounting holes.