Grizzly G0518 - Manual (Page 21)

G0518 Drum / Flap Sander -19-
Figure 17. Tightening the flap sander arbor nut.
3. Using the two arbor wrenches, tighten the
arbor nut to secure the flap sander onto the
arbor as shown in
Figure 17 . Note– Use the
arbor “flat” shown in Figure 11 when using
the arbor wrenches to tighten the left-hand
threaded arbor nut.
!
Figure 18. Dust collection hose hook-up.
Dust Collection
To attach dust collection hoses to the dust
hoods:
Attach each dust hood to 4" hoses from your dust
collection system (
Figure 18 ).
Arbor Nut