Grizzly Air Palm Nailer H6141 - Manual (Page 5)

h6141 air palm nailer -5 -
introduction
if you have any comments regarding this
manual, please write to us at the following
address:
grizzly industrial, inc.
C/o technical Documentation Manager
p.o. Box 2069
Bellingham, Wa 98227-2069
Most importantly, we stand behind our
tools. if you have any service questions or
parts requests, please call or write us at
the location listed below.
grizzly industrial, inc.
1203 lycoming Mall Circle
Muncy, pa 17756
phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web site: http://www.grizzly.com
We are proud to offer the grizzly Model
h6141 air palm nailer. this model is part
of a growing grizzly family of fine pneu-
matic tools. When used according to the
guidelines set forth in this manual, you
can expect years of trouble-free, enjoy-
able operation and proof of grizzly’s com-
mitment to customer satisfaction.
the specifications, details, and photo-
graphs in this manual represent the Model
h6141 as supplied when the manual was
prepared. however, owing to grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of grizzly.
foreword contact info
machine data
nail size ......................................... 6d–50d
air inlet ...........................................¼" npt
Weight .............................................8
1 ⁄
3
lbs.
operating pressure ..................70–100 psi
read the manual before operation.
become familiar with this nailer, its
safety instructions, and its operation
before beginning any work. serious
personal injury may result if safety or
operational information is not under-
stood or followed.