GE DS-242-POE - Manual (Page 10)

10 of 10 P/N 1069668 • REV 1.0 • ISS 22FEB10
Resetting the IP Address
To reset the IP address to the default IP Address "192.168.0.100" or reset the login
password to default value. Press the hardware reset button at the front panel
about 10 seconds. After the device is rebooted, you can login the management
WEB interface within the same subnet of 192.168.0.xx.
Figure 11: Reset button
Contact information
Thank you for purchase GE Security products. You can browse our online FAQ
resource at the GE Security website first to check if it could solve you issue. If you
need more support information, please contact GE Security support team.
888 GE Security (888.437.3287) Toll-free in the US, Puerto Rico, and Canada.
503.885.5700 outside of the toll-free area.
For contact information see our Web site: www.gesecurity.com.
For contact information see our Web site: www.gesecurity.eu.
Copyright GE Security Technology Corp. 2009.
Contents subject to revision without prior notice.
GE Security is a registered trademark of GE Security Technology Corp. All other trademarks belong to
their respective owners.