GE 24999 - Manual (Page 13)

13
Setup, cont.
Setting the Backlighting On time (BACKLIGHT SETUP).To.set.the.length.
of.time.the.Backlighting.remains.on.after.you.stop.pressing.buttons.
1..Press.and.hold.the. SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.
OK..VOL/MUTE.SETUP.is.displayed.
4..Press.the.down.navigation.button.repeatedly.until.BACKLIGHT.SETUP.
is.displayed..Press.and.release. OK.
5..BACKLIGHT.TIME?.is.displayed.with.the.current.Backlight.On.time.digits.
flashing.. Use. the. Up/Down. buttons. to. set. the. Backlight. On. time. in.
increments.of.5.seconds.up.to.a.maximum.of.60.seconds..The.default.
Backlight.On.time.is.10.seconds..To.turn.the.Backlighting.feature.off,.
set.the.time.to.“00”.(zero)..Press.and.release.
OK.
6..SUCCESS.is.displayed.and.the.remote.remains.in.Setup.Mode,.returning.
to.the.CODE.SETUP.screen..Press. EXIT then.OK to.exit.Setup.Mode..
PLEASE.WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.
operation.
Reset the LCD Remote to Factory Defaults (SYSTEM RESET) To.reset.
the.remote.back.to.factory.default.settings..All.User.programmed.
settings,.e.g..code.settings,.learned.commands,.etc.,.are.cleared.to.their.
respective.default.settings..
1..Press.and.hold.the. SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.
OK..VOL/MUTE.SETUP.is.displayed.
4..Press.the.down.navigation.button.repeatedly.until.SYSTEM.RESET.is.
displayed..Press.and.release. OK.
5..CONFIRM.RESET.is.displayed..Press.and.release. OK.
6..PLEASE.WAIT.is.displayed.while.all.settings.are.Reset.then.the.remote.
exits.Setup.and.returns.to.normal.operation.