15 setup, cont – GE 24999 User Manual

Page 15

Advertising
background image

15

Setup, cont.

To set a Timer (Note, the Timer must be cleared first if it was previously

set – see To Clear a Timer below)
1.. Press.and.hold.the.

SETUP.button.until.CODE.SETUP.is.displayed.(takes.

about.3.seconds),.then.release.the

SETUP.button.

2.. Press. the. down. navigation. button. repeatedly. until. TIMER. SETUP. is.

displayed..

3.. Press.and.release.

OK..TV.SLEEP.SETUP.is.displayed..

4.. Press. the. down. navigation. button. until. TIMER. X. SETUP. is. displayed.

(where.“X”.is.1,.2,.3.or.4)..Press.and.release.

OK.

5.. TIMER.X.SET.is.displayed..Press.and.release.

OK.

6.. TIMER.X.TIME?”.is.displayed.with.the.“hours”.flashing..Use.the.Up/Down.

buttons.to.set.the.hours.(keep.going.past.12.to.select.PM.times).then.
press.and.release.

OK.

7.. The.“minutes”.will.be.flashing..Use.the.Up/Down.buttons.to.set.the.

minutes.then.press.and.release.

OK.

8.. TIMER.X.MODE?.is.displayed..Press.and.release.the.desired.Mode.key.

(TV,.VCR,.DVD,.etc.).

9.. TIMER.X.Key1?.is.displayed..Press.and.release.the.key.required.(e.g..

POWER).

10.. SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.

the.CODE.SETUP.screen..Press.

EXIT then.OK to.exit.Setup.Mode..PLEASE.

WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation..
A.“Timer.Bell”.is.displayed.on.the.screen.to.indicate.that.a.timer.is.set.

To clear a Timer (“Timer Bell” in normal display)
1.. Press.and.hold.the.

SETUP.button.until.CODE.SETUP.is.displayed.(takes.

about.3.seconds),.then.release.the

SETUP.button.

2.. Press. the. down. navigation. button. repeatedly. until. TIMER. SETUP. is.

displayed..

3.. Press.and.release.

OK..TV.SLEEP.SETUP.is.displayed..

4.. Press.the.down.navigation.button.until.the.desired.TIMER.X.SETUP.is.

displayed.(where.“X”.is.1,.2,.3.or.4).screen..Press.and.release.

OK.

5.. TIMER.X.CLEAR.is.displayed..Press.and.release.

OK.

6.. CONFIRM.CLEAR.is.displayed..Press.and.release.

OK.

7.. SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.

the.CODE.SETUP.screen..Press.

EXIT then.OK to.exit.Setup.Mode..PLEASE.

WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation.

Advertising
This manual is related to the following products:

24999 GE Universal Remote

Popular Brands
Popular manuals